User's Manual

432 U3585-J-Z125-8-76
SM2 statements (overview) Appendix
(part 1 of 2)
SET-COSMOS-PARAMETER - Define COSMOS monitoring parameters
TITLE = C ’COSMOS’ / <c-string 1..80>
,BUFFER-SIZE = 2 / <integer 1..7>
,NUMBER-OF-BUFFERS = 2 / <integer 2..128>
,ADDITIONAL-INFO = *CONFIGURATION / *NONE / list-poss(2): *CONFIGURATION / *VM2000(...)
*VM2000(...)
 FILE-NAME = <filename 1..54 without-gen-vers>
,OUTPUT = *DISK (...) / *WRAP-AROUND(...) / *TAPE(...) / *STREAM-TAPE(...)
*DISK(...)
 FILE-NAME = list-poss(16): <filename 1..54 without-gen-vers>
*WRAP-AROUND(...)
 FILE-NAME = <filename 1..54 without-gen-vers>
*TAPE(...)
 FILE-NAME = list-poss(16): <filename 1..54 without-gen-vers>
*STREAM-TAPE(...)
 FILE-NAME = list-poss(16): <filename 1..54 without-gen-vers>
,TASK-SELECTION = *ALL / *SPECIFIED(...)
*SPECIFIED(...)
 JOB-NAME = *NOT-SPECIFIED / list-poss(8): <alphanum-name 1..8 with-wild>


,CATEGORY = *NOT-SPECIFIED / list-poss(8): <alphanum-name 1..7 with-wild>


,USER-ID = *NOT-SPECIFIED / list-poss(8): <alphanum-name 1..8 with-wild>


,TSN = *NOT-SPECIFIED / list-poss(16): <alphanum-name 1..4 with-wild>


,TYPE = *NOT-SPECIFIED / list-poss(4): *SYSTEM / *BATCH / *DIALOG / *TP
Continued ➠