User's Manual

400 U3585-J-Z125-8-76
NPS4801 Messages
NPS4801 INSUFFICIENT VIRTUAL ADRESS SPACE FOR ANALYSIS
(B) Routing code: R Weight: 99
Meaning
The storage space requested by the program could not be made available.
The analysis run can be restarted using fewer reports.
NPS4853 NO MEASUREMENTS FOUND DURING ANALYSIS INTERVAL FOR ’(&00)’
Meaning
SM2 did not monitor the variable (&00) in the specified analysis interval.
NPS4854 (&00) SUPPRESSED DUE TO REPORT CONDITION
Meaning
Report (&00) suppressed because measurements are in given range.
NPS4901 VERSIONS OF ’SM2R1’ AND ’MTFILE’ INCOMPATIBLE
(B) Routing code: R Weight: 99
NPS4951 NO PERFORMANCE DATA AVAILABLE FOR CPU TYPE ’(&00)’. CONTACT SYSTEM ADMINISTRATOR
(B) Routing code: R Weight: 99
Meaning
Automatic analysis is not possible without limit values for the specified CPU type.
NPS4953 MONITORED DATA FOR ’(&00)’ REQUIRED TO COMPLETE AUTOMATIC ANALYSIS
(B) Routing code: R Weight: 99
Meaning
Automatic analysis should be conducted using all the required data (cf. the BS2000 manual
’SM2’), otherwise it is possible that bottlenecks will remain undetected.
NPS4954 NO VM2000 RECORD FOUND. NO RELATIVATION OF PERFORMANCE DATA
Meaning
Automatic analysis needs the CPU QUOTA of VM2000 record for relativation of perfor-
mance data.
NPS5000 UNKNOWN ERROR CODE ’(&00)’ OR SUBCODE ’(&01)’ DELIVERED FROM SM2
(B) Routing code: R Weight: 99
Meaning
SM2 delivered an error code (&00) or a subcode (&01) referring to a non-existent message.
NPUCOPY Copyright (C) ’(&00)’ ’(&01)’ All Rights Reserved
NPULOAD Program ’(&00)’, Version ’(&01)’ of ’(&02)’ loaded from file ’(&03)’
NPUSTRT Procedure ’(&00)’, Version ’(&01)’ of ’(&02)’ started from file ’(&03)’