User's Manual

U3585-J-Z125-8-76 397
Messages NPS4354
NPS4354 SM2 LOGGING FILE CONTAINS NO CLOSE RECORD. ANALYSIS NOT COMPLETELY
Meaning
The SM2 logging file was not correctly closed.
Possible reasons are
- SM2 system task has abnormally terminated
- system crash
during creation of SM2 logging file.
Response
The file can be repaired by issuing the command
//REPAIR-DISK-FILES FILE-STATUS=*ANY (FILE-NAME=dateiname).
Subsequently, a CLOSE record should be attached with SM2U1.
NPS4451 TIME STAMP OF CURRENT RECORD ’(&00)’ EARLIER THAN LAST TIME STAMP ’(&01)’
(B) Routing code: R Weight: 99
Meaning
The time stamps in the SM2 logging file are not in ascending order.
NPS4452 SPECIFIED END TIME OF ANALYSIS INTERVAL SMALLER THAN FIRST TIME STAMP OF SM2
LOGGING FILE ’(&00)’
(B) Routing code: R Weight: 99
NPS4453 SPECIFIED START TIME OF ANALYSIS INTERVAL GREATER THAN LAST TIME STAMP OF SM2
LOGGING FILE ’(&00)’
NPS4503 (&00) ACCESSES TO CYLINDER NUMBERS WITH UNKNOWN ADDRESS
(B) Routing code: R Weight: 99
Meaning
(&00): Number of disk accesses for which SM2 could not determine the cylinder number.
NPS4504 (&00) ACCESSES TO BLOCK NUMBERS WITH UNKNOWN ADDRESS
Meaning
(&00): Number of disk accesses for which SM2 could not determine the block number.
NPS4551 NO MEASUREMENTS FOUND FOR TASK ANALYSIS
(B) Routing code: R Weight: 50
Meaning
Task analysis was requested but the SM2 logging file does not contain any task records in
the specified analysis interval.
NPS4552 NO MEASUREMENTS FOUND FOR SPECIFIED ’TSN-SET (&00)’
(B) Routing code: R Weight: 50
Meaning
The SM2 logging file contains no TSNs of the specified TSN set in the given analysis period.