User's Manual

U3585-J-Z125-8-76 393
Messages NPS3021
NPS3021 SM2U1 HANDLES SM2 LOGGING FILES
NPS3022 FILE(S) ’(&00)’ TRANSFERED TO OUTPUT FILE
NPS3023 SM2U1 HANDLES USER LOGGING FILES
NPS3024 SPECIFIED ’LAST-INDEX=(&00)’ GREATER THAN HIGHEST FILE INDEX ’(&01)’. OPERAND
’*LAST’ ASSUMED
Meaning
The specified LAST-INDEX value in the //SEPARATE-FILES statement is greater than the
highest file index (&01) in the input file. All the data up to the end of the input file will be
transferred to the output file.
NPS3025 SPECIFIED ’FIRST-INDEX=(&00)’ GREATER THAN HIGHEST FILE INDEX ’(&01)’ IN INPUT
FILE
Meaning
The specified FIRST-INDEX value in the //SEPARATE-FILES statement is greater than the
highest file index (&01) in the input file.
No files have been transferred to the output file.
NPS3026 OUTPUT FILE ’(&00)’ IS NOT USER LOGGING FILE
Meaning
This message can occur only when an existing output file is to be extended
(OPEN-MODE=EXTEND).
NPS3027 /SET-FILE-LINK COMMAND WITH ’LINK-NAME=(&00)’ MISSING FOR OUTPUT FILE
NPS3028 /SET-FILE-LINK COMMAND WITH ’LINK=(&00)’ MISSING FOR INPUT FILE
NPS3029 VALUE FOR ’LAST-INDEX’ SMALLER THAN VALUE FOR ’FIRST-INDEX’
NPS3030 FILE INDEX VALUES OF BLOCKS ARE NOT IN ASCENDING ORDER
NPS3031 ONLY ’BUFFER-LENGTH=*STD(SIZE=16)’ PERMITTED FOR OUTPUT FILE ’(&00)’.
Meaning
Output files are only permitted with ’BUFFER-LENGTH=*STD(SIZE=16)’.
The value of the BUFFER-LENGTH operand in the /ADD-FILE-LINK command for the
output file is invalid or the existing output file (OPEN-MODE=EXTEND) has a wrong
BUFFER-LENGTH.
Response
Retry the /ADD-FILE-LINK command without operand BUFFER-LENGTH or convert the
existing output file with SM2U1.
NPS4102 SPECIFIED TIMES IN DEFINITION OF ANALYSIS INTERVAL NOT IN ASCENDING ORDER
(B) Routing code: R Weight: 99
Meaning
The start time output for the analysis interval is greater than the corresponding end time.