User's Manual

380 U3585-J-Z125-8-76
NPS0521 Messages
NPS0521 ONLY ’BUFFER-LENGTH=*STD(SIZE=16)’ PERMITTED FOR SM2 LOGGING FILE. STATEMENT
REJECTED
Meaning
SM2 logging files are only permitted with ’BUFFER-LENGTH=*STD(16)’.
The value of the BUFFER-LENGTH operand in the /ADD-FILE-LINK command for a non-
standard SM2 logging file is invalid or the existing non-standard SM2 logging file has wrong
BUFFER-LENGTH.
Response
Retry the /ADD-FILE-LIND command without the BUFFER-LENGTH operand and then
retry OPEN-LOG-FILE statement.
If you want to open extend a non-standard SM2 logging file of an older SM2 version, you
first have to convert the file with SM2U1.
NPS0522 SM2 LOGGING FILE NOT OPENED. STATEMENT REJECTED
(B) Routing code: R Weight: 99
Meaning
An attempt was made to start a monitoring program while the SM2 logging file was not
opened.
NPS0523 MONITORING PROGRAM ’(&00)’ NOT DEFINED. STATEMENT REJECTED
(B) Routing code: R Weight: 99
Meaning
An attempt was made to start a non-defined monitoring program.
NPS0524 MONITORING PROGRAM ’(&00)’ ALREADY ACTIVE. STATEMENT REJECTED
(B) Routing code: R Weight: 50
Meaning
An attempt was made to start a monitoring program that has already been started.
NPS0526 TSN ’(&00)’ NOT IN SYSTEM. STATEMENT REJECTED
(B) Routing code: R Weight: 99
Meaning
An attempt was made to start a monitoring program for task statistics by specifying a TSN,
but the corresponding task could not be found in the system at the time.
NPS0527 SYNTAX ERROR. UNKNOWN MONITORING PROGRAM SPECIFIED
(B) Routing code: R Weight: 99
Meaning
The statement has been rejected.