User's Manual

U3585-J-Z125-8-76 375
Messages NPS0048
NPS0048 COMMAND EXECUTED. TASK MONITORING STARTED ON (&00)
(B) Routing code: R Weight: 50
Meaning
(&00): time stamp for the start of monitoring, in the format
YYYY-MM-DD HH:MM:SS.
Note:
Precisely this time stamp will be put out in the task analysis conducted by the SM2-PA
analysis routine.
NPS0049 COMMAND EXECUTED. TASK MONITORING TERMINATED ON (&00)
(B) Routing code: R Weight: 50
Meaning
(&00): time stamp for the end of monitoring, in the format
YYYY-MM-DD HH:MM:SS.
Note:
Precisely this time stamp will be put out in the task analysis conducted by the SM2R1
analysis routine.
NPS0050 SYSTEM ERROR IN SM2 MODULES. COMMAND REJECTED
(B) Routing code: R Weight: 99
Meaning
A system error has occurred in SM2 during program execution. As a result, task monitoring
cannot be started after the /START-TASK-MEASUREMENT command or no task record 27
can be written to the userspecific SM2 logging file after the /STOP-TASK-MEASUREMENT
command.
Response
Contact the SM2 administrator. He can determine the detailed error cause using the trace
entries of the //SHOW-SM2-STATUS function.
In that case he is able to clear away the difficulties or he can produce detailed diagnostic
material.
NPS0051 SPECIFIED TASK MUST NOT BE MONITORED BY USER
Meaning
The specified TSN belongs to a task under a foreign user id.
Start and termination of monitoring foreign tasks is only permitted for users with privilege
SW-MONITOR-ADMINISTRATION.
NPS0052 TOO MANY OBJECTS SPECIFIED FOR MONITORING. STATEMENT REJECTED
(B) Routing code: R Weight: 99
Meaning
An ADD statement with an object list has been specified. Together with the preceding ADD
statements of the same kind the total number of objects is greater than the maximum
number of objects that may be specified.