Manualshelf

User's Manual

ManualsBrandsSiemens ManualsNetwork HardwareSiemens Network Hardware SM2 monitoring system
361362363364365366367368369370
U3585-J-Z125-8-76 369
Messages NPC0074
NPC0074 ERROR DURING START OF SUBSYSTEM BCAM-COS. MEASUREMENT PROGRAM COSMOS NOT
STARTED.
Meaning
The event BCAM resp. BCPT cannot be opened, because the subsystem BCAM-COS
could not be loaded.
The instruction //INIT-COSMOS resp. //START-MEASUENT-PROGRAM COSMOS was
rejected.
BCAM-COS is not installed or has wrong version.
Response
Install subsystem BCAM-COS first and then start the COSMOS measurement.
NPC0075 ERROR DURING START OF SUBSYSTEM DCAM-COS. MEASUREMENT PROGRAM COSMOS NOT
STARTED.
Meaning
The event DCAM cannot be opened, because the subsystem DCAM-COS could not
be loaded. Statement //INIT-COSMOS or //START-MEASURMENT-PROGRAM COSMOS
rejected.
DCAM-COS is not installed or has wrong version.
Response
Install subsystem DCAM-COS first and then start the COSMOS measurement.
NPECOPY Copyright (C) ’(&00)’ ’(&01)’ All Rights Reserved
NPELOAD Program ’(&00)’, Version ’(&01)’ of ’(&02)’ loaded from file ’(&03)’
NPESTRT Procedure ’(&00)’, Version ’(&01)’ of ’(&02)’ started from file ’(&03)’
NPSCOPY Copyright (C) ’(&00)’ ’(&01)’ All Rights Reserved
NPSLOAD Program ’(&00)’, Version ’(&01)’ of ’(&02)’ loaded from file ’(&03)’
NPSSTRT Procedure ’(&00)’, Version ’(&01)’ of ’(&02)’ started from file ’(&03)’
NPS0001 PRIVILEGE ERROR. STATEMENT REJECTED
(B) Routing code: R Weight: 99
Meaning
Possible reasons:
- A user without privilege "Software Monitor Administration" tried to enter a privileged
SM2 statement.
- A user who is not the primary SM2 administrator tried to enter a privileged
SM2 statement, which is reserved to the primary administrator.
- A privileged user, who is not SM2 administrator tried to enter a SM2 statement, which
is reserved to the administrators.