Manualshelf

User's Manual

ManualsBrandsSiemens ManualsNetwork HardwareSiemens Network Hardware SM2 monitoring system
351352353354355356357358359360
U3585-J-Z125-8-76 353
Notes on SM2 operation Sample procedures
/START-SM2
REMARK =============================================================
REMARK **** BRANCH TO ADMINISTRATION PART ****
REMARK =============================================================
CALL-ADMINISTRATION-PART
REMARK =============================================================
REMARK **** DEFINE SYSSTAT MONITORING PROGRAM ****
REMARK **** MONITOR ALL DISKS AND TAPES ****
REMARK =============================================================
SET-SYSSTAT-PARAMETER USED-DEVICES=(*DISK,*TAPE)
REMARK =============================================================
REMARK **** DEFINE TASK MONITORING PROGRAM ****
REMARK **** MONITOR TASKS WITH TSNS 1111 AND 1112 AND ****
REMARK **** WITH THE JOB NAME TEST ****
REMARK **** MONITOR DISK F00B ONLY ****
REMARK =============================================================
SET-TASK-PARAMETER TASK-SELECTION=*SPECIFIED(TSN=&TSN,JOBNAME= -
TEST),DEVICES=&DEVICE
REMARK =============================================================
REMARK **** DEFINE DISK MONITORING PROGRAM ****
REMARK **** MONITOR DISK F00H ****
REMARK =============================================================
SET-DISK-PARAMETER DEVICES=&DEVICE
REMARK =============================================================
REMARK **** DEFINE FILE MONITORING PROGRAM ****
REMARK =============================================================
ADD-FILE FILE-NAME=:A:$TSOS.TSOSCAT
REMARK =============================================================
REMARK **** DEFINE RESPONSETIME MONITORING PROGRAM ***
REMARK **** DEFINE CONNECTIONS TO BE MONITORED ***
REMARK =============================================================