User's Manual

326 U3585-J-Z125-8-76
ACTIVE PARAMETER SM2 information screens
Monitoring information
SYSSTAT PARAMETER
DEVICES Mnemonic device names of the monitored devices or *NONE, *ALL,
*TAPE or *DISK
TASK PARAMETER
TASK SELECTION *ALL: All tasks are monitored.
Tasks whose monitored data is to be written to the SM2 output file.
Selected tasks are specified under the selection criterion TSN,
USER-ID, JOB-NAME, JOB-CLASS or TYPE.
DEVICES Mnemonic device names monitored by the task monitoring program
for each task or *NONE, *ALL or *DISK
Note
If a selected monitoring program is not active, the message "MEASUREMENT NOT
ACTIVE" is displayed in place of the parameters.
D016ZE04 SM2 ACTIVE PARAMETER 99-03-24 14:20:59
SYSSTAT PARAMETER
-----------------
DEVICES : 431C, 4310, 4330, 434B, 434C, 4350, 4354, 4361, 4363,
4370, 4379
TASK PARAMETER
--------------
TASK SELECTION : *ALL
DEVICES : 430D, 4310, 4312, 4314, 434C, 4350