User's Manual

208 U3585-J-Z125-8-76
Output sequence SM2 screen output
N: Network report
F: Follow-up screen requested by means of a special statement
O: Report containing an overflow screen for further monitored objects
M: Monitoring program must be activated
P: Monitoring process must be permitted for the nonprivileged user
1) The CHANNEL report contains information from the CHANNEL-IO monitoring
program as well as standard monitored data.
This sequence is maintained even if the user has suppressed output of some reports. The
suppressed records are simply skipped without any time being lost.
The same applies to output in controlled mode.
The reports of a given monitoring cycle can be requested in the above sequence. The data
of the next monitoring cycle is output only after the last record of the preceding cycle has
been output.
The reports are listed in alphabetical order in the following description.
POSIX M
CATEGORIE M
MSCF M
NET DEVICE O M
DLM M
GSVOL O M
GS O M
TCP IP O M
BCAM CONNECTION O M
DISK FILE O M
SYMMETRIX CONTROLLER O M
SYMMETRIX DEVICE F O M
Report name Identifiers
Table 7: Output sequence