User's Manual

194 U3585-J-Z125-8-76
Activating user task monitoring SM2 operation
Under certain circumstances SM2 can only supply incomplete information or none at
all:
– If the program to be monitored uses overlay techniques, the module loading infor-
mation should be recorded using LOAD-INFO=DETAILED. If this is not done, the
samples and SVCs for all overlaid modules are assigned to the module loaded at
the time monitoring is terminated.
– No information will be supplied for modules/subsystems loaded as SHARED.
– No information will be supplied for programs which are linked and loaded without
LSD (List for Symbolic Debugging).
– No information will be supplied for code sections which were not generated with the
aid of load events (e.g. if the code was put in memory dynamically requested by
means of MOVE commands).