User's Manual

U3585-J-Z125-8-76 191
SM2 operation Activating user task monitoring
PCOUNTER-INTERVAL =
Defines the sampling cycle for command counter statistics (in CPU milliseconds).
PCOUNTER-INTERVAL = *NONE
The command counter is not activated.
PCOUNTER-INTERVAL = <integer 1..10000>
Sampling cycle in CPU milliseconds. The only samples recorded are those with the status
TU.
SVC-STATISTICS =
The SVC macros of the task to be measured are recorded and written to the user-specific
SM2 output file.
SVC-STATISTICS = *OFF
SVC statistics are not activated.
SVC-STATISTICS = *ON
SVC statistics are activated. The only SVCs recorded are those with the status TU.
LOAD-INFO =
Specifies the point at which the module loading information is to be recorded.
LOAD-INFO = *STD
The module loading information is only recorded when the program is started or terminated
(or when monitoring is started or terminated).
LOAD-INFO = *DETAILED
The module loading information is recorded when the program is started (or when
monitoring is started) and every time the task performs a load or unload operation.