User's Manual

U3585-J-Z125-8-76 161
Statements for nonprivileged users DEVICE
Format
Operands
*DISK Specifies the monitored data of up to 8 disk devices with the
greatest activity during the monitoring cycle.
The disk devices are sorted in descending order according to
activity, and the DEVICE report includes their monitored data.
This operand is predefined at program start time. It must only be
specified if the presetting has been changed but is to be reactivated.
*ALL Specifies the monitored data of up to 8 devices with the greatest
activity during the monitoring cycle. The devices are sorted in
descending order according to activity, and the DEVICE report
includes their monitored data.
Designates devices whose monitored data is to be output
separately in the DEVICE report (+) or no longer to be output (-).
In the case of the first device in an input line, the sign can be
omitted. In this case this entry completely replaces the previously
valid device selection, and, at the same time, the presetting goes
into effect.
If the first device name in the input line is preceded by a sign, the
devices of this input line are added to those previously selected or
removed.
Each further device in the input line must be preceded by a sign.
dev-name Mnemonic name for the device as assigned at system generation
(see the PDT - Physical Device Table).
Operation Operands
DEVICE
*DISK
*ALL
[
+
-



dev-name]







[
+
-



dev-name]
[
+
-



dev-name] ..