User Manual

en Cleaning and servicing
38
2. Clean the appliance, the fittings
and the door seals clean with a
dish cloth, lukewarm water and a
little pH-neutral washing-up liquid.
3. Dry thoroughly with a soft, dry
cloth.
4. Insert the fittings.
5. Electrically connect the appliance.
6. Switch on the appliance.
→Page35
7. Putting the food into the appliance.
Cleaning the condensation
channel and drainage hole
Regularly clean the condensation
channel and drainage hole to ensure
that the condensation can drain.
▶
Carefully clean the condensation
channel and the drainage hole,
e.g. using a moistened cotton bud.
→Fig.
3
Removing the fittings
If you want to clean the fittings thor-
oughly, remove these from your ap-
pliance.
Removing the shelf
▶
Lift the shelf, pull it out, lower it
and swing it out to the side.
→Fig.
4
Removing the bottle tray
▶
Pull out and remove the bottle tray.
→Fig.
5
Removing door racks
▶
Lift the door rack upwards and re-
move it.
→Fig.
6
Removing the fruit and vegetable
container
1. Pull the container out all the way.
2. Lift the container at the front
and
remove it ⁠.
→Fig.
7