User Manual

List of Parameters

Parameters

1-87

SINAMICS G120 Control Units CU230P-2 Parameter Manual (LH9), 06/2011

Description: Displays the status of the digital inputs.

Dependency: Refer to: r0723

Notice: To the terminal designation:

The first designation is valid for CU320, the second for CU310.

Note: AI: Analog Input

DI: Digital Input

T: Terminal

Description: Displays the inverted status of the digital inputs.

Dependency: Refer to: r0722

Notice: To the terminal designation:

The first designation is valid for CU320, the second for CU310.

Note: DI: Digital Input

T: Terminal

r0722.0...12 CO/BO: CU digital inputs, status / CU DI status

Access level: 2 Calculated: - Data type: Unsigned32

Can be changed: - Scaling: - Data set: -

Units group: - Unit selection: -

Min Max Factory setting

- - -

Bit field: Bit Signal name 1 signal 0 signal FP

00 DI 0 (T. 5) High Low -

01 DI 1 (T. 6) High Low -

02 DI 2 (T. 7) High Low -

03 DI 3 (T. 8) High Low -

04 DI 4 (T. 16) High Low -

05 DI 5 (T. 17) High Low -

11 DI 11 (T. 3, 4) AI 0 High Low -

12 DI 12 (T. 10, 11) AI 1 High Low -

r0723.0...12 CO/BO: CU digital inputs, status inverted / CU DI status inv

Access level: 3 Calculated: - Data type: Unsigned32