User Manual

Parameters

List of Parameters

1-86

SINAMICS G120 Control Units CU230P-2 Parameter Manual (LH9), 06/2011

Description: Displays the number of inputs and outputs

Index: [0] = Number of digital inputs

[1] = Number of digital outputs

[2] = Number of digital input/outputs bidirectional

[3] = Number of analog inputs

[4] = Number of analog outputs

Description: Displays the actual value at the digital inputs.

This means that the actual input signal can be checked at terminal DI x or DI/DO x prior to switching from the simu-

lation mode (p0795.x = 1) to terminal mode (p0795.x = 0).

Note: DI: Digital Input

T: Terminal

r0720[0...4] CU number of inputs and outputs / CU I/O count

Access level: 3 Calculated: - Data type: Unsigned16

Can be changed: - Scaling: - Data set: -

Units group: - Unit selection: -

Min Max Factory setting

- - -

r0721 CU digital inputs, terminal actual value / CU DI actual value

Access level: 2 Calculated: - Data type: Unsigned32

Can be changed: - Scaling: - Data set: -

Units group: - Unit selection: -

Min Max Factory setting

- - -

Bit field: Bit Signal name 1 signal 0 signal FP

00 DI 0 (T. 5) High Low -

01 DI 1 (T. 6) High Low -

02 DI 2 (T. 7) High Low -

03 DI 3 (T. 8) High Low -

04 DI 4 (T. 16) High Low -

05 DI 5 (T. 17) High Low -

11 DI 11 (T. 3, 4) AI 0 High Low -

12 DI 12 (T. 10, 11) AI 1 High Low -