User Manual

Parameters

List of Parameters

1-26

SINAMICS G120 Control Units CU230P-2 Parameter Manual (LH9), 06/2011

Description: Displays the smoothed actual power factor.

Note: Smoothing time constant = 300 ms

The signal is not suitable as a process quantity and may only be used as a display quantity.

Significance for the motor: Motor power factor

Significance for the infeed: Power factor at the connection point (p3470, p3471)

Description: Displays the electrical energy used since the last reset.

Dependency: Refer to: p0040

Description: Setting to reset the energy consumption display (r0039).

Procedure:

Set p0040 = 0 --> 1

The display is reset and the parameter is automatically set to zero.

Dependency: Refer to: r0039

Description: Displays the saved energy referred to 100 operating hours.

Dependency: Refer to: p0040

Description: Sets the smoothing time constant for the following display values:

r0063[1], r0068[1], r0080[1], r0082[1].

r0038 Power factor smoothed / Cos phi smooth

Access level: 4 Calculated: - Data type: FloatingPoint32

Can be changed: - Scaling: - Data set: -