User Manual

Spare parts and accessories
8.2 Accessories
PM230 Power Module, IP55
66 Hardware Installation Manual, 12/2016, A5E35319202B AB
8.2
Accessories
Accessories supplied
Accessory kit
The accessory kit contains the parts required for shielding and for connecting the Power
Module - except cables and tools. It comprises the following items:
● Plug connector for the mains connection (FSA ... FSC only)
● Plug connector for the motor connection (FSA ... FSC only)
● Shield clamps
● Rubber sleeves for unused cable glands in the bolting plate
● Adapter between CU230P-2 Control Unit and operator panel (FSA ... FSC only)
● Connecting cable between Control Unit and operator panel (FSD ... FSF only)
● Cap screws (M4x20, T20)
● Screws for output line terminals (M4)
● Ferrite rings (suitable for all frame sizes)
● Extended USB cable (FSA ... FSC only)
Article numbers
● FSA: 6SL3200-0SK02-0AA0
● FSB: 6SL3200-0SK03-0AA0
● FSC: 6SL3200-0SK04-0AA0
● FSD: 6SL3200-0SK05-0AA0
● FSE: 6SL3200-0SK06-0AA0
● FSF: 6SL3200-0SK07-0AA0
Optional accessories
Dummy cover
Article number: 6SL3256-1BA00-0AA0
The dummy cover is required to achieve degree of protection IP55/UL type 12 if you operate
the inverter without BOP-2 or IOP.
Operator panel, BOP-2,
Article number: 6SL3255-0AA00-4CA1
Operator panel, IOP,
Article number: 6SL3255-0AA00-4JA1
Adapter for CU240E-2 Control Unit
KnorrTec Article No.: 10055500
The adapter is required when operating a Power Module of frame size FSA ... FSC with a
CU240B/E-2 and an operator panel.