User Manual

Index
C-734
© Siemens AG 2008 - 2013 All Rights Reserved
SINAMICS G120 CU230P-2 Control Units List Manual (LH9), 01/2013
8565
Drive data sets
(DDS), 2-647
9204
Receive telegram, free PDO mapping,
2-533
9206
Receive telegram, Predefined Connection
Set (p8744 = 1), 2-534
9208
Send telegram, free PDO mapping
(p8744 = 2), 2-535
9210
Send telegram, Predefined Connection
Set (p8744 = 1), 2-536
9220
Control word, CANopen, 2-537
9226
Status word, CANopen, 2-538
9310
Configuration, addresses and diagnostics,
2-540
9342
STW1 control word interconnection, 2-541
9352
ZSW1 status word interconnection, 2-542
9360
Receive telegram, free interconnection via
BICO (p0922 = 999), 2-543
9370
Send telegram, free interconnection via
BICO (p0922 = 999), 2-544
9372
Status words, free interconnection, 2-545
A
Acknowledgment
Adjustable, 3-655
Default, 3-655
IMMEDIATELY, 3-653
POWER ON, 3-653
PULSE INHIBIT, 3-653
Adjustable parameter, 1-9
Alarm
Cause, 3-656
Display, 3-650
Explanation of list, 3-654
Fault location, 3-655
General, 3-650
How to distinguish an alarm from a fault,
3-650
Message value, 3-655
Name, 3-655
Number, 3-654
Number range, 3-659
Remedy, 3-656
Alarm buffer, 2-638
Alarm messages, 3-659
Alarm value, 3-656
Analog inputs, 2-506
Analog outputs, 2-506
ASCII table, A-724
Axxxx, 3-654
B
BI, Binector Input, 1-10
BICO technology, 2-501
Binector
Input (BI), 1-10
Output (BO), 1-10
Bit array (parameter), 1-18
BO, Binector Output, 1-10
Bypass, 2-599
C
Calculated, 1-12
Can be changed (parameters), 1-13
CANopen, 2-532, 2-539
Cascade control, 2-600
CDS (Command Data Set), 1-14, 2-644,
2-646
CI, Connector Input, 1-10
Closed-loop control
Technology controller, 2-627
Vector, 2-574
CO, Connector Output, 1-10
CO/BO, Connector/Binector Output, 1-10
Command data sets, 2-644
Configuring messages, 2-638
Connector
Input (CI), 1-10
Output (CO), 1-10
Control words, 2-514, 2-517
Converter
Binector-connector, 2-531
Connector-binector, 2-529
Cxxxxx, 3-654