User Manual

ManualsBrandsSiemens ManualsVariable Speed DriveSINAMICS G120 Control Units CU230P-2 Parameter Manual

351

352

353

354

355

356

357

358

359

360

List of parameters

Parameters

1-357

SINAMICS G120 CU230P-2 Control Units List Manual (LH9), 01/2013

Index 5 corresponds to the CANopen object 5805 hex

Index 6 corresponds to the CANopen object 5806 hex

Index 7 corresponds to the CANopen object 5807 hex

Index 8 corresponds to the CANopen object 5808 hex

Index 9 corresponds to the CANopen object 5809 hex

Index 10 corresponds to the CANopen object 580A hex

Index 11 corresponds to the CANopen object 580B hex

Index 12 corresponds to the CANopen object 580C hex

Index 13 corresponds to the CANopen object 580D hex

Index 14 corresponds to the CANopen object 580E hex

Index 15 corresponds to the CANopen object 580F hex

Description: Sets the signal source for free PZD send objects 16 bit for SDO transfer.

An index can only be used, if the corresponding object has not been mapped in a PDO.

Index: [0] = PZD object 0

[1] = PZD object 1

[2] = PZD object 2

[3] = PZD object 3

[4] = PZD object 4

[5] = PZD object 5

[6] = PZD object 6

[7] = PZD object 7

[8] = PZD object 8

[9] = PZD object 9

[10] = PZD object 10

[11] = PZD object 11

[12] = PZD object 12

[13] = PZD object 13

[14] = PZD object 14

[15] = PZD object 15

Note: Index 0 corresponds to the CANopen object 5810 hex

Index 1 corresponds to the CANopen object 5811 hex

Index 2 corresponds to the CANopen object 5812 hex

Index 3 corresponds to the CANopen object 5813 hex

Index 4 corresponds to the CANopen object 5814 hex

Index 5 corresponds to the CANopen object 5815 hex

Index 6 corresponds to the CANopen object 5816 hex

Index 7 corresponds to the CANopen object 5817 hex

Index 8 corresponds to the CANopen object 5818 hex

Index 9 corresponds to the CANopen object 5819 hex

Index 10 corresponds to the CANopen object 581A hex

Index 11 corresponds to the CANopen object 581B hex

Index 12 corresponds to the CANopen object 581C hex

Index 13 corresponds to the CANopen object 581D hex

Index 14 corresponds to the CANopen object 581E hex

Index 15 corresponds to the CANopen object 581F hex

p8746[0...15] CI: CAN free PZD send objects 16 bit / Free PZD send 16

CU230P-2_CAN Access level: 3 Calculated: - Data type: U32 / Integer16

Can be changed: U, T Scaling: 4000H Dyn. index: -

Units group: - Unit selection: - Func. diagram: -

Min Max Factory setting

- - 0