User Manual

Parameters

List of parameters

1-336

SINAMICS G120 CU230P-2 Control Units List Manual (LH9), 01/2013

Description: Displays the ACX file saved in the appropriate directory in the non-volatile memory.

Note: For a value = 9999999, the following applies: The read operation is still running.

Description: Displays the ACX file saved in the appropriate directory in the non-volatile memory.

Dependency: Refer to: p1000

Note: For a value = 9999999, the following applies: The read operation is still running.

Description: Displays the ACX file saved in the appropriate directory in the non-volatile memory.

Note: For a value = 9999999, the following applies: The read operation is still running.

Description: Displays the macro currently being executed on the drive object.

Dependency: Refer to: p0015, p1000, r8570, r8571, r8572, r8573

Description: Displays all of the devices connected to the CAN bus after run-up.

r8600

= 00000000 hex: No drive recognized.

= 02010192 hex: 1 Vector drive

Note: Corresponds to the CANopen object 1000 hex.

For each detected drive, the device type is displayed in object 67FF hex.

r8571[0...39] Macro Binector Input (BI) / Macro BI

Access level: 4 Calculated: - Data type: Unsigned32