User Manual

ManualsBrandsSiemens ManualsVariable Speed DriveSINAMICS G120 Control Units CU230P-2 Parameter Manual

321

322

323

324

325

326

327

328

329

330

List of parameters

Parameters

1-323

SINAMICS G120 CU230P-2 Control Units List Manual (LH9), 01/2013

Description: Sets the maximum dwell time for the energy-saving mode.

Index: [0] = Reserved

[1] = Mode 2

Note: Pe: PROFIenergy profiles

Description: Sets the general properties for energy-saving.

Note: Pe: PROFIenergy profiles

Description: Sets the mode-dependent properties for energy-saving.

Index: [0] = Reserved

[1] = Mode 2

Note: Pe: PROFIenergy profiles

Description: Display and binector output for the state display PROFIenergy energy saving active or inactive.

Note: Bit 0 and bit 1 are inverse of one another.

Pe: PROFIenergy profiles

p5606[0...1] Pe energy-saving mode dwell time maximum / Pe t_dwell max

CU230P-2_PN Access level: 3 Calculated: - Data type: Unsigned32

Can be changed: T Scaling: - Dyn. index: -

Units group: - Unit selection: - Func. diagram: -

Min Max Factory setting

0 [ms] 4294967295 [ms] 4294967295 [ms]

p5611 Pe energy-saving properties general / Pe properties gen

CU230P-2_PN Access level: 3 Calculated: - Data type: Unsigned32

Can be changed: T Scaling: - Dyn. index: -

Units group: - Unit selection: - Func. diagram: -

Min Max Factory setting

- - 0000 bin

Bit field: Bit Signal name 1 signal 0 signal FP

00 Inhibit PROFIenergy Yes No -

01 Drive initiates OFF1 Yes No -

02 Trans into energy-saving mode from PRO-

FIdrive state S4 poss

Yes No -

p5612[0...1] Pe energy-saving properties mode-dependent / Pe properties mod

CU230P-2_PN Access level: 3 Calculated: - Data type: Unsigned32

Can be changed: T Scaling: - Dyn. index: -

Units group: - Unit selection: - Func. diagram: -

Min Max Factory setting

- - [0] 0110 bin

[1] 0000 bin

Bit field: Bit Signal name 1 signal 0 signal FP

00 Reserved Yes No -

r5613.0...1 CO/BO: Pe energy-saving active/inactive / Pe save act/inact

CU230P-2_PN Access level: 3 Calculated: - Data type: Unsigned8

Can be changed: - Scaling: - Dyn. index: -

Units group: - Unit selection: - Func. diagram: -

Min Max Factory setting

- - -

Bit field: Bit Signal name 1 signal 0 signal FP

00 Pe active Yes No -

01 Pe inactive Yes No -