User Manual

ManualsBrandsSiemens ManualsVariable Speed DriveSINAMICS G120 Control Units CU230P-2 Parameter Manual

Parameters

List of parameters

1-30

SINAMICS G120 CU230P-2 Control Units List Manual (LH9), 01/2013

Description: Displays the temperatures in the power unit.

Index: [0] = Inverter maximum value

[1] = Depletion layer maximum value

[2] = Rectifier maximum value

[3] = Air intake

[4] = Interior of power unit

[5] = Inverter 1

[6] = Inverter 2

[7...10] = Reserved

[11] = Rectifier 1

[12] = Reserved

[13] = Depletion layer 1

[14] = Depletion layer 2

[15] = Depletion layer 3

[16] = Depletion layer 4

[17] = Depletion layer 5

[18] = Depletion layer 6

[19] = Reserved

Notice: Only for internal Siemens troubleshooting.

Note: The value of -200 indicates that there is no measuring signal.

r0037[0]: Maximum value of the inverter temperatures (r0037[5...10]).

r0037[1]: Maximum value of the depletion layer temperatures (r0037[13...18]).

r0037[2]: Maximum value of the rectifier temperatures (r0037[11...12]).

The maximum value is the temperature of the hottest inverter, depletion layer, or rectifier.

r0037[2, 3, 6, 11, 14...18] is only relevant for chassis power units.

Description: Displays the temperatures in the power unit.

Index: [0] = Inverter maximum value

[1] = Depletion layer maximum value

[2] = Rectifier maximum value

[3] = Air intake

[4] = Interior of power unit

[5] = Inverter 1

[6] = Inverter 2

[7] = Inverter 3

[8] = Reserved

[9] = Reserved

[10] = Reserved

[11] = Rectifier 1

[12] = Reserved

[13] = Depletion layer 1

[14] = Depletion layer 2

[15] = Depletion layer 3

[16] = Depletion layer 4

[17] = Depletion layer 5

r0037[0...19] CO: Power unit temperatures / PU temperatures

PM230

PM240

PM250, PM260

Access level: 3 Calculated: - Data type: FloatingPoint32

Can be changed: - Scaling: p2006 Dyn. index: -

Units group: 21_1 Unit selection: p0505 Func. diagram: 8014

Min Max Factory setting

- [°C] - [°C] - [°C]

r0037[0...19] CO: Power unit temperatures / PU temperatures

PM330 Access level: 3 Calculated: - Data type: FloatingPoint32

Can be changed: - Scaling: p2006 Dyn. index: -

Units group: 21_1 Unit selection: p0505 Func. diagram: 8014

Min Max Factory setting

- [°C] - [°C] - [°C]