User Manual

ManualsBrandsSiemens ManualsVariable Speed DriveSINAMICS G120 Control Units CU230P-2 Parameter Manual

251

252

253

254

255

256

257

258

259

260

List of parameters

Parameters

1-251

SINAMICS G120 CU230P-2 Control Units List Manual (LH9), 01/2013

Description: Binector output for bit-serial interconnection of PZD1 (normally control word 1) received from the PROFIdrive con-

troller.

Description: Binector output for bit-serial interconnection of PZD2 received from the PROFIdrive controller.

r2090.0...15 BO: PROFIdrive PZD1 receive bit-serial / PZD1 recv bitw

Access level: 3 Calculated: - Data type: Unsigned16

Can be changed: - Scaling: - Dyn. index: -

Units group: - Unit selection: - Func. diagram: 2468

Min Max Factory setting

- - -

Bit field: Bit Signal name 1 signal 0 signal FP

00 Bit 0 ON OFF -

01 Bit 1 ON OFF -

02 Bit 2 ON OFF -

03 Bit 3 ON OFF -

04 Bit 4 ON OFF -

05 Bit 5 ON OFF -

06 Bit 6 ON OFF -

07 Bit 7 ON OFF -

08 Bit 8 ON OFF -

09 Bit 9 ON OFF -

10 Bit 10 ON OFF -

11 Bit 11 ON OFF -

12 Bit 12 ON OFF -

13 Bit 13 ON OFF -

14 Bit 14 ON OFF -

15 Bit 15 ON OFF -

r2091.0...15 BO: PROFIdrive PZD2 receive bit-serial / PZD2 recv bitw