User Manual

Parameters

Overview of parameters

1-16

SINAMICS G120 CU230P-2 Control Units List Manual (LH9), 01/2013

Function diagram

The parameter is included in this function diagram. The structure of the parameter

function and its relationship with other parameters is shown in the specified func-

tion diagram.

Table 1-5 Unit group (p0595)

Unit group Unit selection for p0595 = Reference value

for %

Value Unit

9_1 The values that can be set and the technological units are shown in

p0595 (See Section 1.2).

Table 1-6 Unit group (p11026)

Unit group Unit selection for p11026 = Reference value

for %

Value Unit

9_2 The values that can be set and the technological units are shown in

p11026 (See Section 1.2).

Table 1-7 Unit group (p11126)

Unit group Unit selection for p11126 = Reference value

for %

Value Unit

9_3 The values that can be set and the technological units are shown in

p11126 (See Section 1.2).

Table 1-8 Unit group (p11226)

Unit group Unit selection for p11226 = Reference value

for %

Value Unit

9_4 The values that can be set and the technological units are shown in

p11226 (See Section 1.2).