User Manual

SINAMICS G120 CU230P-2 Control Units
List Manual (LH9), 04/2014, A5E33838102B AA
759
Index
Explanation of list, 658
Fault location, 659
Fault reaction, 655, 662
General information, 654
How to distinguish a fault from an alarm, 654
List of all faults, 666
Message class, 659
Message value, 659
Name, 659
Number, 658
Number range, 664
Remedy, 663
Fault buffer, 644
Configuration, 646
Fault value, 662
Faults/alarms configuration, 644
Faults/alarms triggering (r2129), 644
Fixed speed setpoints, 566
Fixed values, 630, 631
Free function blocks, 608
Free interconnection, status words, 533
Free technology controller 0, 1, 2, 602
Function diagram (parameters), 21
Function diagrams, CANopen
Control word, CANopen, 539
Receive telegram, free PDO mapping, 535
Receive telegram, Predefined Connection Set
(p8744 = 1), 536
Send telegram, free PDO mapping (p8744 = 2), 537
Send telegram, Predefined Connection Set
(p8744 = 1), 538
Status word, CANopen, 540
Function diagrams, data sets
Command Data Sets
(CDS), 651
Drive Data Sets
(DDS), 652
Function diagrams, diagnostics
Alarm buffer, 647
Fault buffer, 646
Faults/alarms configuration, 649
Faults/alarms trigger word (r2129), 648
Overview, 645
Function diagrams, fieldbus interface
Configuration, addresses and diagnostics, 542
Receive telegram, free interconnection via BICO
(p0922 = 999), 545
Send telegram, free interconnection via BICO (p0922
= 999), 546
Status words, free interconnection, 547
STW1 control word interconnection, 543
ZSW1 status word interconnection, 544
Function diagrams, free function blocks
ADD (adder with 4 inputs), 614
AND, 610
AVA (absolute value generator), 616
BSW (binary switch), 624
DFR (D flip-flop), 623
DIF (derivative action element), 627
DIV (divider), 615
INT (integrator), 627
LIM (limiter), 625
LVM (double-sided limit monitor with hysteresis), 628
MFP (pulse generator), 619
MUL (multiplier), 615
NCM (numeric comparator), 617
NOT (inverter), 613
NSW (numeric change-over switch), 624
OR, 611
PCL (pulse contractor), 619
PDE (ON delay), 620
PDF (OFF delay), 621
PLI (polyline scaling), 618
PST (pulse stretcher), 622
PT1 (smoothing element), 626
RSR (RS flip-flop), 623
Sampling times of the runtime groups, 609
SUB (subtracter), 614
XOR (exclusive OR), 612
Function diagrams, general information
Explanation of the symbols (part 1), 500
Explanation of the symbols (part 2), 501
Explanation of the symbols (part 3), 502
Handling BICO technology, 503
Function diagrams, input/output terminals
Connection overview, 505
Digital inputs (DI 11 ... DI 12), 510
Digital inputs, electrically isolated (DI 0 ... DI5), 506
Digital outputs (DO 0 ... DO 2), 507
Three-wire control, 514
Two-wire control, 513
Function diagrams, internal control/status words
Control word 1 (r0054), 554
Control word 2 (r0055), 555
Control word, faults/alarms, 562
Control word, sequence control, 549
Control word, setpoint channel, 551
Sequence control - Missing enable signals, 565
Sequence control - Sequencer, 564
Status word 1 (r0052), 552
Status word 2 (r0053), 553
Status word, closed-loop control, 557
Status word, closed-loop current control, 558
Status word, faults/alarms 1 and 2, 563
Status word, monitoring functions 1, 559
Status word, monitoring functions 2, 560
Status word, monitoring functions 3, 561
Status word, sequence control, 550
Status word, speed controller, 556