User Manual

SINAMICS G120 CU230P-2 Control Units List Manual (LH9), 04/2014, A5E33838102B AA
577
3 Function diagrams
3.10 Vector control
Fig. 3-70 6020 – Speed control and generation of the torque limits, overview
- 6020 -
Function diagram
87654321
fp_6020_97_01.vsd
Vector control
G120 CU230P-2
07.04.2014 V4.7
Speed control and generation of the torque limits, overview
p1400 p1401 r0056 r1408
r0067
I_Ausg max
n_modell
[6700.1]
[3001.8]
[6700.1]
Symmetrizing
Acceleration model
Kp_n-/Tn_n adaptation
Integrator control
Speed controller
Torque setpoint
Generating the
torque limits
[6630] Upper/lower torque limit
[6640] Current/power/torque limits
[6490] Closed-loop speed control configuration
[6491] Closed-loop flux control configuration
[2526] Status word closed-loop control
[2530] Status word closed-loop current control
Speed setpoint filter
r0062
n_set after filter [rpm]
n_C n_act T_s SL
p1452
r1438
n_ctrl n_set [rpm]
Mot M_mom of inert
p0341
Mot MomInert Ratio
p0342
n_ctrl SL Kp
p1470
n_ctrl SL Tn
p1472
r1518
M_accel [Nm]
r1508
M_set bef. M_suppl [Nm]
r0079
M_set [Nm]
r1538
M_max upper eff [Nm]
r1539
M_max lower eff [Nm]
Current limit
p0640
M_max upper
p1520 [D] (0.00)
M_max lower
p1521 [D] (0.00)
a_prectrl scal
p1496
n_set_filt 1 T
p1416
[6030] [6031]
[6040]
[6060]
[6050]
r1170
n_ctrl setp sum [rpm]
r0063[0..2]
n_act [rpm]
Kp Tn
n_pre-control
[0]
Encoderless closed-
loop speed control
0
P_max mot
p1530
P_max gen
p1531
Kp adaptation Tn adaptation
–