User Manual

SINAMICS G120 CU230P-2 Control Units

List Manual (LH9), 04/2014, A5E33838102B AA

447

2 Parameters

2.2 List of parameters

Description: Display parameter of instance LVM 1 of the double-sided limiter that input quantity X was at least once X > M + L and

X is >= M + L - HY.

Description: Display parameter of instance LVM 1 of the double-sided limiter that the input quantity X lies within the interval.

Description: Display parameter of instance LVM 1 of the double-sided limiter that input quantity X was at least once X < M - L and

X is <= M - L + HY.

Description: Setting parameter for the run-time group in which instance LVM 1 of the double-sided limiter is to be called.

Value: 5: Run-time group 5

6: Run-time group 6

9999: Do not calculate

Description: Setting parameter for the run sequence of instance LVM 1 within the run-time group set in p20282.

Note: The function blocks with a lower run sequence value are calculated before function blocks with a higher run

sequence value.

r20279 BO: LVM 1 input quantity above interval QU / LVM 1 X above QU

Access level: 3 Calculated: - Data type: Unsigned32

Can be changed: - Scaling: - Dyn. index: -