Brochure

• Temperature control in mixing circuits for motor oil circulation
A
pplication examples
MX..461..P
• Temperature control in mixing circuits for screw-compressors (compressed air)
• Temperature control of fuel circuits in mixing circuits for petrol and diesel oil
• High pressure control for the calibration of components for electronic injection
components
• Control of cutting-oil emulsion for industrial grinding machines
Type summary
Type reference DN k
VS
Δp
max
Δp
S
Positioning
MX..461.. MX..461..P
1)
[m
3
/h] [kPa] [kPa]
Operating
voltage
signal time
Spring
return
MX..461.15-0.6 MX..461.15-0.6P
0,6
MX..461.15-1.5 MX..461.15-1.5P
1,5
MX..461.15-3.0 MX..461.15-3.0P
15
3,0
MX..461.20-5.0 MX..461.20-5.0P
20 5,0
MX..461.25-8.0 MX..461.25-8.0P
25 8,0
MX..461.32-12 MX..461.32-12P
32 12
MX..461.40-20 MX..461.40-20P
40 20
MX..461.50-30 MX..461.50-30P
50 30
MXF461.65-50 MXF461.65-50P
65 50
300 300 AC 24 V
DC 0...10 V
or
DC 2…10 V
or
DC 4...20 mA
< 2 s

M3P80FY M3P80FYP
80 80
M3P100FY M3P100FYP
100 130
see datasheet N4454
1)
for media containing mineral oils
.. = F for flanged valves
G for threaded valves
Δp
max
= max. permissible differential pressure across the valve’s control path, valid for the entire
actuating range of the motorized valve
Δp
S
= max. permissible differential pressure (close off pressure) at which the motorized valve will
close securely against the pressure (used as throughport valve)
k
VS
= nominal flow rate of cold water (5 to 30 °C) through the fully opened valve (H
100
) at a
differential pressure of 100 kPa (1 bar)
Type DN Type suffix Description Examples Datasheet
MXG461..U 15…50 U Set of 3 NPT threaded fittings
enclosed
MXG461.15-3.0U N4455
MXF461..U 65 U Flanges to ASME/ANSI
B16.1 Class125
MXF461.65-50U N4455
High per
formance
range
Type Description
ALG..3 (.. = DN) Set of 3 threaded fittings for 3-port valves, consisting of 3 union nuts, 3 discs and
3 flat seals
Z155/.. (.. = DN)
Blank flange set with blank flange, seal, screws, spring washers and nuts
SEZ91.6 External interface for DC 0…20 V phase cut control signal, refer to data sheet
N5143
Accessories
Order When ordering, please give quantity, product name and type reference.
Product nu
mber Stock number Description
MXG461.25-8.0 MXG461.25-8.0 Threaded valve with magnetic actuator
ALG253 ALG253 Set of threaded union fittings
MXF461.20-5.0
MXF461.20-5.0 Flanged valve with magnetic actuator
Z155/20F Z155/20F Set of blank flanges
Valve body and magnetic actuator form one assembly and cannot be separated.
Delivery
The threaded fitting sets and blank flanges are packed and supplied separately.
2/14
Siemens Modulating control valves with magnetic actuators, PN16 CA1N4455en
Building Technologies 2012-10-23