Environmental Declaration

EPD - Type II
According to ISO 14021
*Variant parts list
[g]
Total weight of device
Clamping piece, Stem lower, piston
Valve body, stem, pressure ring , cover, cylinder
Comments
MVL 661.32-10
5'675
441
MVL 661.32-12
5'764
2'523 2'569
306
EU-directive 2011/65/EU (RoHS)
The device does not contain substances in concentrations and applications banned under the EU RoHS Directive.
To the best of our knowledge and according to the information of our suppliers the above mentioned device and its packaging contain no substances of the
candidate list according to Article 59 (1, 10) of the regulation (EC) No. 1907/2006 concerning the Registration, Evaluation, Authorisation and Restriction of
Chemicals (REACH) in concentrations above 0.1 % w/w.
(Status according to the creation date of this document.)
Legal Disclaimer: This declaration is for information purpose only.
Siemens Schweiz AG therefore does not assume liability for any error or for any consequences which may arise from the use of this information to the maximum extent
under the law.
This Environmental Product Declaration does not constitute a guarantee of the composition of a product, neither does it guarantee that the product will retain a particular
composition for a particular period.
The device is classified as waste electronic equipment in terms of the European Directive 2012/19/EU (WEEE) and must
not be disposed of as unsorted municipal waste. The relevant national legal rules are to be adhered too. Regarding
disposal, use the systems setup for collecting electronic waste.
Observe all local and applicable laws.
Disposal
Regulation (EC) No. 1907/2006 (REACH)
The device is halogen-free with exception of:
PCB; Cover, Base, Mask
22.10.2014
Please contact your local Siemens branch office to get further information on environmental aspects and disposal.
under the law.
Page 2/2
CA2E4714 3a_en.xls; 17.04.2015