Operating instructions

Basic functions

Step by Step

Call forwarding

You can immediately forward internal or external calls to

different internal or external telephones (destinations).

(An external destination requires special configuration

in the system.)

You have two options for programming variable call for-

warding on your station:

• "Variable forwarding (key-based configuration)"

Æ page 47

• "Variable forwarding (menu-based configuration)"

Æ page 49

Variable forwarding

(key-based configuration)

Configuring using the call forwarding key

r Press the key shown.

Select and confirm the option shown.

The "Call forward status" page opens.

d Select a call forwarding type:

• All calls

• Internal

• External

The phone displays the current setting.

Confirm.

Select and confirm the option shown.

The "Edit call forward" page opens.

When call forwarding is active, a special dial tone

sounds when you lift the handset.

If DID DTMF is active (contact your service per-

sonnel), you can also forward calls to this desti-

nation. Destinations: fax = 870, DID = 871,

fax DID = 872.

If you are a call forwarding destination, your dis-

play will show the station number or the name of

the originator on the upper line and that of the

caller on the lower line.

Edit call forwarding

Off g

On g