User guide

Getting to know your OpenStage phone
23
Programmable sensor keys
Your OpenStage 80/80 G has nine (OpenStage 60/60 G: eight) illuminated
sensor keys. You can assign functions or numbers to them.
Depending on how they are programmed, you can use the sensor keys as:
• Function keys Æ page 89
• Repdial keys Æ page 95
• Procedure keys Æ page 93
Touch the key to activate the programmed function or dial the stored num-
ber.
Press and hold a function key or repdial key to open a menu for program-
ming it. Direct station selection (DSS) keys can only be programmed via
the service menu.
A label indicating the key’s function is displayed to the left of the key; it can-
not be changed. You can change the labels for repdial or DSS keys accord-
ing to your requirements Æ page 96.
The status of a function is shown by the LED on the corresponding sensor
key.
Meaning of LED displays on function keys
Increase the number of programmable sensor keys by connecting a
key module Æ page 18.
You can program internal and external station numbers on the sec-
ond level for all programmable sensor keys (except the Shift key).
The LED function is not available for internal station numbers on
the second level.
LED Meaning of function key
S
Off The function is deactivated.
T
Flashing
[1]
[1] In this manual, flashing sensor keys are identified by this icon, regardless of the flashing
interval. The flashing interval represents different statuses, which are described in detail in
the corresponding sections of the manual.
Indicates the function status.
R
On The function is activated.
The programmable sensor keys on multi-line phones function as
trunk keys Æ page 140.