User guide

Step by Step
Using team functions
150
Accepting a call for another member of
your team
You can use your own telephone to accept calls for oth-
er telephones in your team, even while engaged in an
ongoing call. To do this, contact your service personnel
to find out if a pickup group has been configured.
Prerequisite: Your telephone rings briefly. "Call for:" ap-
pears on the upper display line with the station number/
name of the originator; the station number/name of the
caller appears on the lower line.
Select and confirm the option shown.
Ringing group
You can have calls for your telephone signaled audibly at
up to five other internal phones. The phone that an-
swers the call first receives the call.
Saving, displaying, and deleting telephones for the
ringing group
v Open the Program/Service menu Æ page 41.
Confirm.
Select and confirm the option shown.
Follow the display prompts (enter the internal station
number).
Removing all telephones in a call ringing group
c Open the idle menu Æ page 29.
Select and confirm the option shown.
Pickup - group
Special features must be taken into consider-
ation if your telephone operates with
HiPath 5000 (system networking via PC net-
work) Æ page 156!
Destinations g
Ringing group on
If your phone belongs to a ringing group, your
display will show the station number or the name
of the originator on the upper line and that of the
caller on the lower line.
Ringing group off