User guide

User Guide Siemens ID Mouse Professional V 4.0
July 2001 Edition Installation and Startup
Page 6
1 Installation and Startup and
1.1 Introduction
This product makes access control to a PC, network or domain much easier to handle for the
average Windows 98 and Windows ME user.
1.2 System Requirements
It is assumed that Windows 98 or Windows ME has been installed on your PC, and that the
PC has a USB interface. If USB support can be activated from BIOS, it must be activated in
BIOS Setup.
The USB capability of the system can be tested by double-clicking the program
\Tools\USBReady.exe supplied on the CD-ROM.
1.3 Installation Instructions
1. The Setup program is started automatically when you place the supplied CD-ROM in
the drive. If the Setup program is not started automatically, select "Run" from the
"Start" menu and enter the following command:
X:\Setup where X is the drive letter for your CD-ROM drive.
2. The Setup program is started.
3. The Setup program guides you through the installation process.
4. You can specify any drive or folder as your installation folder; however, it is
recommended that you select the suggested folder.