User guide

User Guide Siemens ID Mouse Professional V 4.0
July 2001 Edition Login
Page 22
3 Logging on
3.1 Logging on to the System
The login dialog box is displayed automatically when the system is booted, when the Siemens
ID Mouse Professional screen saver is terminated and after "waking up" from ACPI standby
mode, provided that data has already been stored in the User Manager.
The login dialog box comprises two tabs:
 Fingerprint
 User ID and Password
3.1.1 Logging on with a Fingerprint
In the Login dialog box, you are prompted to place one of the fingers previously captured in the
User Manager on the mouse sensor by means of a simple animation. The optical signaling
between the sensor and the scroll wheel is activated. Shortly after you place a finger on the
sensor, an image of the fingerprint is displayed in the login window.
If the login is unsuccessful, corresponding error messages are issued (see chapter 0 Once
you have successfully completed the operation, you must restart the computer.
).
The login dialog box depends on the selected logon mode (Options
).
“Repeat Logon” Button
You can use this button to start the identification process again.
“Shut Down” Button
You can use this button to shut down the PC.