User guide

User Guide Siemens ID Mouse Professional V 4.0
July 2001 Edition Installation and Startup
Page 16
After each image has been successfully captured, the corresponding fingerprint is displayed
in the lower left-hand part of the screen.
If you do not place the finger on the sensor in time, a corresponding message is issued. If the
quality of the captured image
is not good enough, the capture must be repeated.
Once the three accepted images have been checked and stored, the circle above the finger
involved turns green.
You are then requested to perform a test verification. This verifies that the finger data is
suitable for the logon procedure.
Actual fingerprint
image
Accepted image
User information
regarding current
fingerprint image