Specifications

AT Command Set for L55 Platform 2003-11-21
Copyright  Siemens AG 2003 All Rights Reserved Page 79 of 131
Cont.
*) Note:
Only the default value needs to be implemented.
Use test command to check which parameter values are in
fact possible!
Read command
AT+FDIS?
Response
<cdec> OK
Parameter
VR
See Test command
BR See Test command
WD See Test command
LN See Test command
DF See Test command
EC See Test command
BF See Test command
ST See Test command
Write command
AT+FDIS=<VR>,<BR>,<WD>,<LN>,<DF>,<EC>,<BF>,<ST>
Response
+FDIS: (list of <VR>s), (list of <BR>s), (list of <WD>s), (list of <LN>s), (list
of <DF>s), (list of <EC>s), (list of <BF>s), (list of <ST>s)
Parameter
VR
See Test command
BR See Test command
WD See Test command
LN See Test command
DF See Test command
EC See Test command
BF See Test command
ST See Test command
2.3.11.11 AT+FDR
AT+FDR Begin or continue phase C data reception
Execute command
AT+FDR
Used for FAX class 2 only
This command initiates transition to Phase C data reception.
Response
CONNECT/OK/ERROR