Specifications

AT Command Set for L55 Platform 2003-11-21
Copyright  Siemens AG 2003 All Rights Reserved Page 77 of 131
2.3.11.9 AT+FDFFC
AT+FDFFC Data Compresssion Format Conversion
Used for FAX class 2 only
This parameter determines whether there is a mismatch in the ME
response between the data format negotiated for the facsimile session
(reported by the +FDCS:DF subparameter) and the Phase C data desired
by the controlling application, indicated by the optional +FDT:DF
subparameter, or the +FDIS=DF subparameter for the +FDR operation.
Test command
AT+FDFFC=?
Response
+FDFFC: (list of supported <df>s)
OK
Parameter
<df>
0 mismatch checking is always disabled. The controlling
application has to check the +FDCS: DF
subparameter and transfer matching data
Read command
AT+FDFFC?
Response
<df> OK
Parameter
<df>
See Test Command
Write command
AT+FDFFC=<df>
Response
+FDFFC: (list of supported <df>s)
OK
Parameter
<df>
See Test Command