Specifications

AT Command Set for L55 Platform 2003-11-21
Copyright  Siemens AG 2003 All Rights Reserved Page 76 of 131
2.3.11.8 AT+FDCC
AT+FDCC Select service for MO SMS messages
This command allows the connected application to sense and constrain
the capabilities of the facsimile DCE (=ME), from the choices defined in
ITU T.30 Table 2.
Used for Faxclass 2 only
Test command
AT+FDCC=?
Response
+FDCC: (list of <VR>s), (list of <BR>s), (list of <WD>s), (list of <LN>s),
(list of <DF>s), (list of <EC>s), (list of <BF>s), (list of <ST>s)
Parameter
VR
Vertical Resolution
BR Bit rate
WD Page Width
LN Page length
DF Data compression Format
EC Error Correction mode
BF Binary File transfer mode
ST Scan Time / line
Note:
For further information see AT+FDIS
Read command
AT+FDCC?
Response
<dcc>
OK
Parameter
VR
See Test command
BR See Test command
WD See Test command
LN See Test command
DF See Test command
EC See Test command
BF See Test command
ST See Test command
Write command
AT+FDCC=<VR>,<BR>,<WD>,<LN>,<DF>,<EC>,<BF>,<ST>
Response
+FDCC: (list of <VR>s), (list of <BR>s), (list of <WD>s), (list of <LN>s),
(list of <DF>s), (list of <EC>s), (list of <BF>s), (list of <ST>s)
Parameter
VR
See Test command
BR See Test command
WD See Test command
LN See Test command
DF See Test command
EC See Test command
BF See Test command
ST See Test command