Specifications

AT Command Set for L55 Platform 2003-11-21
Copyright  Siemens AG 2003 All Rights Reserved Page 75 of 131
2.3.11.6 AT+FCLASS
AT+FCLASS Select, read or test FAX service class
Test command
AT+FCLASS=?
Response
+FCLASS: (list of supported <n>s)
OK
Parameter
<n>
0 data (e.g. EIA/TIA-602 or ITU V.25ter)
1 Fax class 1 (EIA/TIA-578-A, Service Class 1)
2 Vendor-specific (Fax class 2 (EIA/TIA SP-2388, an early draft
version of EIA/TIA-592-A – Service class 2.1))
Read command
AT+FCLASS?
Response
<n> OK
Parameter
<n>
See Test command
Write command
AT+FCLASS=<n>
Parameter
<n>
See Test command
2.3.11.7 AT+FCR
AT+ FCR Capability to receive
Write command
AT+FCR=<cr>
Response
OK
Parameter
<cr>
0 ME cannot receive message data. This value can be
used when the application has insufficient storage. The
ME can send and can be polled for a file.
1 ME can receive message data.
Used for FAX class 2 only