Specifications

AT Command Set for L55 Platform 2003-11-21
Copyright  Siemens AG 2003 All Rights Reserved Page 74 of 131
2.3.11.4 AT+FCIG
AT+FCIG Query or set the Local polling id
Used for FAX class 2 only
Test command
AT+FCIG=?
Response
+FCIG: (max. length of Local Polling ID string) (range of supported ASCII
character values)
OK
Parameter
<id>
Local Polling ID string, max. length and possible content as
reported by test command.
Default value is empty string (“”).
See also “AT+FLID” command
Read command
AT+FCIG?
Response
<id> OK
Parameter
<id>
See Test command
Write command
AT+FCIG=<id>
Parameter
<id>
See Test command
2.3.11.5 AT+FCQ
AT+FCQ Control Copy Quality
This command controls Copy Quality checking when receiving a fax
Used for FAX class 2 only
Test command
AT+FCQ=?
Response
+FCQ: (list of supported copy quality checking <cq>s)
OK
Parameter
<cq>
0 No checking of copy quality performed. The ME will generate
Copy Quality OK (MCF) responses to complete pages
1 ME can check 1-D phase data. The connected application
must check copy quality for 2-D phase C data
Read command
AT+FCQ?
Response
<cq> OK
Parameter
<cq>
See Test command
Write command
AT+FCQ=<id>
Parameter
<cq>
See Test command