Specifications

AT Command Set for L55 Platform 2003-11-21

2.3.11.2 AT+FBADMUL

AT+ FBADMUL Define, read or test number of bad lines

Used for FAX class 2 only

This command defines the “Copy-Quality-OK” multiplier. The number of

lines received with a bad pixel count is multiplied by this number. If the

result exceeds the total number of lines on the page the error rate is

considered too high. A threshold multiplier value of 20 corresponds to a

5% error rate.

Read command

AT+ FBADMUL?

Response

Parameter

<n>

Write command

AT+ FBADMUL =<n>

Parameter

<n>

0...255 0 indicates that error checking is present or

disabled

(Default value: 20)

2.3.11.3 AT+FBOR

AT+ FBOR Query the bit order for receive mode

Used for FAX class 2 only

Query the bit order for receive-mode. The mode is set by the ME

dependent on the selected Service Class.

Test command

AT+FBOR=?

Response

+FBOR: (list of supported bit order modes <bor>s) OK

Parameter

<bor>

0 direct bit order for both Phase C and Phase B/D data

1 Reversed bit order for Phase C data, direct bit order for

Phase B/D data

Read command

AT+FBOR?

Response

Parameter

<bor>

Write command

AT+FBOR=<bor>

Response

OK / ERROR

Parameter

<bor>