Specifications

AT Command Set for L55 Platform 2003-11-21
Copyright  Siemens AG 2003 All Rights Reserved Page 56 of 131
Write command (cont.)
AT+CGQREQ=[<cid>[,<precedence>[,<delay>[,<reliability>[,<peak>[,<mean>]]]]]]
Parameter
<cid>
See Read command
<PDP_type> See Test command
<precedence> See Test command
<delay> See Test command
<reliability> See Test command
<peak> See Test command
<mean> See Test command
Response
OK/ERROR/+CME ERROR
2.3.6.11 AT+CGPADDR
AT+CGPADDR Show PDP address
Test command
AT+CGPADDR=?
Response
+CGPADDR: (list of defined <cid>s)
OK/ERROR/+CME ERROR
Parameter
<cid>
numeric PDP Context Identifier
Write command
AT+CGPADDR=[<L2P> ,[<cid> [,<cid> [,…]]]]
Parameter
<L2P>
layer 2 protocol to be used between the TE and MT
PPP Type PPP
<cid> numeric PDP Context Identifier
Response
+CGPADDR::
<cid>,<PDP_addr>[<CR><LF>+CGPADDR:<cid>,<PDP_addr>[.
..]]
OK/ERROR/+CME ERROR