Specifications

AT Command Set for L55 Platform 2003-11-21
Copyright  Siemens AG 2003 All Rights Reserved Page 54 of 131
2.3.6.9 AT+CGQMIN
AT+CGQMIN Quality of Service Profile (Minimum acceptable)
Test command
AT+CGQMIN=?
Response
+CGQMIN: <PDP_type>, (list of supported <precedence>s), (list of supported
<delay>s), (list of supported <reliability>s) , (list of supported <peak>s), (list of
supported <mean>s)
[<CR><LF>+CGQMIN: <PDP_type>, (list of supported <precedence>s), (list of
supported <delay>s), (list of supported <reliability>s) , (list of supported
<peak>s), (list of supported <mean>s)[…]]
OK/ERROR/+CME ERROR
Parameter
<PDP_type>
string parameter of Packet Data Protocol type
PPP Type PPP
IP Type IP
<precedence> numeric parameter for the precedence class
0 network subscribed value
1 .. 3
<delay> numeric parameter for the delay class
0 network subscribed value
1 .. 4
<reliability> numeric parameter for the reliability class
0 network subscribed value
1..5
<peak> numeric parameter for the peak throughput class
0 network subscribed value
1 .. 7
<mean> numeric parameter for the mean throughput class
0 network subscribed value
1..12
Read command
AT+CGQMIN?
Response
+CGQMIN:<cid>,<precedence>,<delay>,<reliability>,<peak>,<mean>[<CR><LF>
+CGQMIN:<cid>,<precedence>,<delay>,<reliability>,<peak>,<mean>[…]]
OK/ERROR/+CME ERROR
Parameter
<cid>
numeric PDP Context Identifier
<PDP_type> See Test command
<precedence> See Test command
<delay> See Test command
<reliability> See Test command
<peak> See Test command
<mean> See Test command
Write command
AT+CGQMIN=[<cid>[,<precedence>[,<delay>[,<reliability>[,<peak>[,<mean>]]]]]]
Parameter
<cid>
See Read command
<PDP_type> See Test command
<precedence> See Test command
<delay> See Test command
<reliability> See Test command
<peak> See Test command
<mean> See Test command
Response
OK/ERROR/+CME ERROR