Specifications

AT Command Set for L55 Platform 2003-11-21
Copyright  Siemens AG 2003 All Rights Reserved Page 103 of 131
2.4.2.24 AT^SPLM
AT^SPLM Read the PLMN list
Test command
AT^SPLM=?
Response
OK
Execute command
AT^SPLM
Response
^SPLM: numeric <oper>,long alphanumeric <oper><CR><LF>
^SPLM:.....
OK/ERROR/+CME ERROR
Parameter
<oper>
Network operator in numeric and alphanumeric notation
2.4.2.25 AT^SPLR
AT^SPLR Read an entry from the preferred-operator list
Test command
AT^SPLR=?
Response
^SPLR: (list of supported <index>s)
OK/ERROR/+CME ERROR
Parameter
<index>
Location numbers
Write command
AT^SPLR=<index1>
[, <index2>]
Response
^SPLR: <index1>, numeric <oper>
^SPLR: .....
^SPLR: <index2>, numeric <oper>
OK/ERROR/+CME ERROR
Parameter
<index1>
Location number where the read of the entry starts
<index2> Location number where the read of the entry ends
<oper> Network operator in numeric form
2.4.2.26 AT^SPLW
AT^SPLW Write an entry to the preferred-operator list
Test command
AT^SPLW=?
Response
^SPLW: (list of supported <index>s)
OK/ERROR/+CME ERROR
Parameter
<index>
Location number
Parameter
<index>
Location number at which the entry is written
Write command
AT^SPLW=<index>[, <oper>]
<oper> Network operator in numeric form
Response
OK/ERROR/+CME ERROR