Specifications

AT Command Set for L55 Platform 2003-11-21
Copyright  Siemens AG 2003 All Rights Reserved Page 99 of 131
<name> string representing the name of the file; used character set
should be the one selected with Select TE Character Set
AT+CSCS
<start> integer indicating the time in seconds from the beginning of
a voice memo (not supported at the moment)
<date_time> -47...+48 string of format
yyyy-MM-dd,hh:mm:ss[±zz]
indicating year, month, day, hour, minutes,
seconds and, optionally, time zone
(indicates the difference between the local
time and GMT, expressed in quarters of an
hour)
E.g. 6th of May 1994, 22:10:00 GMT+2
hours stands for "94/05/06,22:10:00+08"
Read command
^SVMC?
^SVMC: <type>,<time>
+CME ERROR: <err>
<type> integer indicating the type of action being performed for a
voiced memo; the following values are defined
0 Idle
1 recording of voice memo
2 playback of voice memo
<time> see Test command
Execute command
^SVMC
^SVMC: <type>,<time>
+CME ERROR: <err>
Unsolicited result
code:
<int>
0 Normal Stop
1 Memory failure (e.g. MMC removed)
2 Memory full
3 Incoming call
4 Warning: 5 seconds remaining for recording
5 – 254 not defined (for later use)
255 Unknown event
Description:
The Test command returns a list of possible actions, a list of available indexes of
Voice Memos, the remaining recording time and maximum length for the name of
a Voice Memo.
The Write command is used to control the Voice Memo functionality of the
mobile. The action parameter lets you start, stop, pause, or cancel a Voice Memo
playback. Also, this command can be used to start, stop, cancel and pause the
recording of a Voice Memo.
The Read command indicates whether a playback or recording is running (type),
the remaining time (recording time or playback time) and the name (if available)
of the current Voice Memo.
The Execute command controls the pausing of playback and recording. Each
time this command is executed there is a change between playback/record and
pause.