User Manual

5 / 14

Siemens Control device PN25, safety function to DIN EN 14597 CE1N4389en

Building Technologies 10.01.2011

Override control input can be operated in following different modes of operation

Z-mode

no function fully open closed override with 0…1000 Ω

Connections Transfer

linear or equal-percentage linear or equal-percentage

• Z-contact not connected

• Valve stroke follows Y-

input

• Z-contact connected

directly to G

• Y-input has no effect

• Z-contact connected

directly to G0

• Y-input has no effect

• Z-contact connected to M

via resistor R

• Starting position at 50  /

end position at 900 

• Y-input has no effect

Shown operation modes are based on the factory setting «direct acting»

Y-input has no effect in Z-mode.

Accessories

ASC9.3

double auxiliary switch

ASZ7.3..

potentiometer

adjustable switching points ASZ7.3: 0…1000 

ASZ7.31: 0…135 

ASZ7.32: 0…200 

ASC1.6

Auxiliary switch

Switching point 0...5 % stroke

Override control

input Z

MKB562..G

Note

MKB532..G

MKB562..G