Operating instructions

ManualsBrandsSiemens ManualsIndustrialMICROMASTER

04/02 1 Parameters

MICROMASTER 420 Parameter List

6SE6400-5BA00-0BP0

r2028[2] USS parity error

Min: -

Datatype: U16 Unit: - Def: -

P-Group: COMM Max: -

Displays number of USS telegrams with parity error.

Index:

r2028[0] : Serial interface COM link

r2028[1] : Serial interface BOP link

r2029[2] USS start not identified Min: -

Datatype: U16 Unit: - Def: -

P-Group: COMM Max: -

Displays number of USS telegrams with unidentified start.

Index:

r2029[0] : Serial interface COM link

r2029[1] : Serial interface BOP link

r2030[2] USS BCC error Min: -

Datatype: U16 Unit: - Def: -

P-Group: COMM Max: -

Displays number of USS telegrams with BCC error.

Index:

r2030[0] : Serial interface COM link

r2030[1] : Serial interface BOP link

r2031[2] USS length error Min: -

Datatype: U16 Unit: - Def: -

P-Group: COMM Max: -

Displays number of USS telegrams with incorrect length.

Index:

r2031[0] : Serial interface COM link

r2031[1] : Serial interface BOP link

r2032 BO: CtrlWrd1 from BOP link (USS) Min: -

Datatype: U16 Unit: - Def: -

P-Group: COMM Max: -

Displays control word 1 from BOP link (word 1 within USS).

Bitfields:

Bit00 ON/OFF1 0 NO

1 YES

Bit01 OFF2: Electrical stop 0 YES

1NO

Bit02 OFF3: Fast stop 0 YES

1NO

Bit03 Pulse enable 0 NO

1 YES

Bit04 RFG enable 0 NO

1 YES

Bit05 RFG start 0 NO

1 YES

Bit06 Setpoint enable 0 NO

1 YES

Bit07 Fault acknowledge 0 NO

1 YES

Bit08 JOG right 0 NO

1 YES

Bit09 JOG left 0 NO

1 YES

Bit10 Control from PLC 0 NO

1 YES

Bit11 Reverse (setpoint inversion) 0 NO

1 YES

Bit13 Motor potentiometer MOP up 0 NO

1 YES

Bit14 Motor potentiometer MOP down 0 NO

1 YES

Bit15 Local / Remote 0 NO

1 YES

Level: