Operating instructions

04/02 1 Parameters
MICROMASTER 420 Parameter List
6SE6400-5BA00-0BP0
59
P1101 Skip frequency bandwidth
Min: 0.00
CStat: CUT Datatype: Float Unit: Hz Def: 2.00
P-Group: SETPOINT Active: Immediately QuickComm. No Max: 10.00
Delivers frequency bandwidth to be applied to skip frequencies (in [Hz]).
Details:
See P1091 (skip frequency 1).
P1110 BI: Inhibit neg. freq. setpoint Min: 0:0
CStat: CT Datatype: U32 Unit: - Def: 0:0
P-Group: COMMANDS Active: first confirm QuickComm. No Max: 4000:0
Inhibits direction reversal, thus preventing a negative setpoint from causing motor from running in reverse.
Instead, it will run at minimum frequency (P1080) in the normal direction.
Common Settings:
0 = Disabled
1 = Enabled
Note:
It is possible to disable all reverse commands (i.e. the command is ignored). To do this, set P0719 = 0
(remote selection of command/setpoint source) and define the command sources (P1113) individually.
Notice:
This function does not disable the "reverse" command function; rather, a reverse command causes motor to
run in the normal direction as described above.
P1113 BI: Reverse Min: 0:0
CStat: CT Datatype: U32 Unit: - Def: 722:1
P-Group: COMMANDS Active: first confirm QuickComm. No Max: 4000:0
Defines source of reverse command used when P0719 = 0 (remote selection of command/setpoint source).
Common Settings:
722.0 = Digital input 1 (requires P0701 to be set to 99, BICO)
722.1 = Digital input 2 (requires P0702 to be set to 99, BICO)
722.2 = Digital input 3 (requires P0703 to be set to 99, BICO)
19.B = Reverse via BOP
r1114 CO: Freq. setp. after dir. ctrl. Min: -
Datatype: Float Unit: Hz Def: -
P-Group: SETPOINT Max: -
Displays setpoint frequency after change of direction.
r1119 CO: Freq. setpoint before RFG Min: -
Datatype: Float Unit: Hz Def: -
P-Group: SETPOINT Max: -
Displays output frequency after modification by other functions, e.g.:
* P1110 BI: Inhibit neg. freq. setpoint,
* P1091 - P1094 skip frequencies,
* P1080 Min. frequency,
* P1082 Max. frequency,
* limitations,
* etc.
Level:
3
Level:
3
Level:
3
Level:
3
Level:
3