Operating instructions

International English 5. SYSTEM PARAMETERS
70 MICROMASTER 420 Operating Instructions
6SE6400-5AA00-0BP0
Parameter
Number
Parameter Name
Min
Max
[Default]
Units
♦
♦♦
♦P0003 User
Access Level
♦
♦♦
♦P0004 Setting
♦
♦♦
♦Changeable
♦
♦♦
♦Status
P1040 Setpoint of the Keypad (Motor potentiometer)
Determines Setpoint
for Keypad (Motor potentiometer) control (P1000=1).
Note:
If Keypad (Motor potentiometer) setpoint is selected either as Main setpoint or Additional
setpoint then the reverse direction will be inhibited by default using P1032. If you want to
re-enable reverse direction then set P1032 = 1.
-650
650
[5]
Hz
2
10
‘•’
JOG frequency rightP1058
Jogging is used to advance the motor by small amounts. It is controlled via the jog button or
using a non-latching switch on one of the digital inputs.
While jog right is selected, this parameter determines the frequency at which the inverter
will run. The up and down ramp times used while jogging are set in P1060 and P1061
respectively.
0
650
[5]
Hz
2
10
‘•’
JOG frequency leftP1059
While jog left is selected, this parameter determines the frequency at which the inverter will
run.
0
650
[5]
Hz
2
10
‘•’
JOG ramp-up timeP1060
Sets ramp-up time. This is the time used while jogging or when the function “use jog ramp
times” is activated.
f (Hz)
0
f max
(P1082)
Jog Ramp up time (P1060)
time (s)
0
650
[10]
s
2
10
‘•’